Skip to main content

 

 

Cisco Defense Orchestrator

Run CLI Macros on your ASAs

  1. On the Devices & Services page, select one or more devices.
  2. Click Command Line Interface cli_button.png.

  3. In the command panel, click the star cli_star.png.

  4. Select a CLI macro from the command panel.

  5. Run the macro one of two ways:

  • If the macro has no parameters to define, click Send. The response to the command appears in the response pane. You're done.
  • If the macro contains parameters, such as the Configure DNS macro below, click >_ View Parameters.

cli_macro_example.png

  1.  In the Parameters pane, fill in the values for the parameters in the Parameters fields.

cli_macro_dns_example.png

  1. Click Send.

  • Was this article helpful?