Skip to main content

 

 

Cisco Defense Orchestrator

Guideline for Routing

Bridge Groups

  • In routed mode, you must specify the BVI as the gateway; you cannot specify the member interface.
  • For traffic that originates on the Firepower Threat Defense device (such as syslog or SNMP) that is destined through a bridge group member interface for a non-directly connected network, you need to configure either a default route or static routes so the Firepower Threat Defense device knows out of which bridge group member interface to send traffic. If you have servers that cannot all be reached through a single default route, then you must configure static routes.
  • Was this article helpful?