Skip to main content

 

 

Cisco Defense Orchestrator

Bulk Deploy Device Configurations

If you have made changes to multiple devices, for instance by editing a shared object, you can apply those change to all of the affected devices at once: 

  1. On the Devices & Services page, select all of the devices for which you have made configuration changes on CDO. These devices should show "Not Synced" status.
  2. Deploy the changes using one of these methods:
  • Click the Deploy button deploy_pending_icon.jpg at the top-right of the screen. This gives you a chance to review the pending changes on the devices you selected before you deploy them. Click Deploy Now to deploy the changes. 

Note: If you see a yellow warning triangle next to a device on the Devices with Pending Changes screen, you cannot deploy a change to that device. Hover your mouse over the warning triangle for information about why changes cannot be deployed to that device. 

  • Click Deploy All write_all.png on the details pane. Review any warnings and click OK. The bulk deployment starts immediately without a review of the changes.
  1. (Optional) Click the Jobs icon Jobs.png in the navigation bar to view the results of the bulk deploy. 

Scheduling Automatic Deployments

You can also configure your tenant to schedule deployments to a single device with pending changes by scheduling automatic deployments

  • Was this article helpful?