secure-erase

Permanently erases the hard drive data.

Before you use this command, you must connect to the management center using the serial port. When you execute this command, the device reboots and all data is removed permanently. The process may take a few hours to complete; larger drives take longer. Ensure you have the power supply to prevent disruptions during the secure erase process. After the erase is completed, you can install a fresh software image.

Caution

Erasing your hard drive results in the loss of all data on the appliance, including the ISO image.

Supported Devices

Firepower Management Center 1600, 2600, 4600
Firewall Management Center 1700, 2700, 4700

Syntax


secure-erase

Example


> secure-erase
****************************** Caution ********************************

 If you run this command:
     - The management center hard drive data, including configurations
       and bootable images, will be permanently erased.
     - The device will reboot and reinitialize.

Note: Do not power off your device during this procedure.

***********************************************************************

Do you want to proceed? (Yes/No)