(Optional) Configure Split Tunneling

Split tunnel allows VPN connectivity to a remote network across a secure tunnel and also to a network outside VPN tunnel. Configure split tunneling if you want to allow your VPN users to access an outside network while they remain connected to the remote access VPN. To configure a split-tunnel list, you must create a Standard Access List or Extended Access List.

For more information, see Configuring Group Policies.

Procedure

Step 1

Choose Devices > Remote Access.

Step 2

Click Edit on the remote access VPN policy for which you want to configure split tunneling.

Step 3

Click Edit on the required connection profile.

Step 4

Click Add to add a group policy or click Edit Group Policy.

Step 5

Choose General > Split Tunneling.

Step 6

From the IPv4 Split Tunneling or IPv6 Split Tunneling list, select Exclude networks specified below and then select the networks that you want to exclude from VPN traffic.

The default setting allows all traffic over the VPN tunnel.

Step 7

Click Standard Access List or Extended Access List, and select an access list from the drop-down or add a new one.

Step 8

If you choose to add a new standard or extended access list, do the following:

  1. Specify the Name for the new access list and click Add.

  2. Choose Allow from the Action drop-down.

  3. Select the network traffic that you want to allow over the VPN tunnel and click Add.

Step 9

Save your changes.