Check for live NSEL events

This task allows you to verify that NSEL events are being properly received and processed by the Cisco Cloud system.

Check for both live and historical events. This procedure will filter for NSEL events that the Cisco Cloud has received within the last hour.

Procedure

Step 1

From the Security Cloud Control Home page, click Firewall.

Step 2

In the left pane, choose Events & Logs > Events > Event Logging.

Step 3

Click the Live tab.

Step 4

Pin-open the event filter.

Step 5

In the ASA Events section, make sure NetFlow is checked.

Step 6

In the Sensor ID field, enter the IP address of the ASA you configured to send NSEL events.

Step 7

At the bottom of the filter, make sure that Include NetFlow Events is checked.

The system displays live NSEL events from the specified ASA device, confirming that events are being successfully received and processed.