Check for historical NSEL events

Step 1

From the Security Cloud Control Home page, click Firewall.

Step 2

In the left pane, choose Events & Logs > Events > Event Logging.

Step 3

Click the Historical tab.

Step 4

Pin-open the event filter.

Step 5

In the ASA Events section, make sure NetFlow is checked.

Step 6

Set the Start time far enough back in time to check if Security Cloud Control ever did receive NSEL events.

Step 7

In the Sensor ID field, enter the IP address of the ASA you configured to send NSEL events.

Step 8

At the bottom of the filter, make sure that Include NetFlow events is checked.