Add a Device Endpoint Attribute to a DAP

Procedure

Step 1

Edit a DAP record and choose Endpoint Criteria > Device.

Step 2

Select the Match Criteria All or Any.

Step 3

Click Add and select the = or ≠ operator to check the attribute to be equal to or not equal to the value you enter for the following attributes:

  • Host Name—Hostname of the device you are testing for. Use the computer’s host name only, not the fully qualified domain name (FQDN).

  • MAC Address—MAC address of the network interface card you are testing for. The address must be in the format xxxx.xxxx.xxxx where x is a hexadecimal character.

  • BIOS Serial Number—BIOS serial number value of the device you are testing for. The number format is manufacturer-specific.

  • Port Number—Listening port number of the device.

  • Secure Desktop Version—Version of the Host Scan image running on the endpoint.

  • OPSWAT Version—The OPSWAT client version.

  • Privacy Protection—None, Cache cleaner, Secure Desktop.

  • TCP/UDP Port Number—TCP or UDP port in the listening state that you are testing for.

Step 4

Click Save.