Configure BGP Network Settings

Network settings are used to add networks that will be advertised by the BGP routing process and route maps that will be examined to filter the networks to be advertised.

Procedure

Step 1

On the Device Management page, click Routing.

Step 2

(For a virtual-router-aware device) From the virtual routers drop-down, choose the virtual router for which you are configuring BGP.

Step 3

Choose BGP > IPv4 or IPv6.

Step 4

Click Networks.

Step 5

Click Add and update the Add Networks dialog box:

  1. Network— Choose the network to be advertised by the BGP routing processes.

    Note

    For a network prefix to be advertised, a route to the device must exist on the routing table.

    To add a new network object, see Creating Network Objects.

  2. (Optional) Route Map— Enter or choose a route map that should be examined to filter the networks to be advertised. If not specified, all networks are redistributed. To add a new route map object, see Route Map.

  3. Click OK.

Step 6

Click Save.