Configure BGP Route Injection Settings

Route injection settings allow you to define the routes to be conditionally injected into the BGP routing table.

Procedure

Step 1

On the Device Management page, click Routing.

Step 2

(For a virtual-router-aware device) From the virtual routers drop-down, choose the virtual router for which you are configuring BGP.

Step 3

Choose BGP > IPv4 or IPv6.

Step 4

Click Route Injection.

Step 5

Click Add and update the Add Route Injection dialog box:

  1. Inject Map— Enter or select the route map that specifies the prefixes to inject into the local BGP routing table. To create a new route map object, click Add (add icon). For the procedure to add a new route map, see Configure Route Map Entry.

  2. Exist Map— Enter or select the route map containing the prefixes that the BGP speaker will track.

  3. Injected routes will inherit the attributes of the aggregate route— Check this box to configure the injected route to inherit attributes of the aggregate route.

  4. Click OK.

Step 6

Click Save.