Defaults for Alarms
The following table specifies the defaults for alarm input interfaces (contacts), redundant power supply, and temperature.
|
Alarm |
Trigger |
Severity |
SNMP Trap |
Output Relay |
Syslog Message | |
|---|---|---|---|---|---|---|
|
Alarm Contact 1 |
Enabled |
Closed State |
Minor |
Disabled |
Disabled |
Enabled |
|
Alarm Contact 2 |
Enabled |
Closed State |
Minor |
Disabled |
Disabled |
Enabled |
|
Redundant Power Supply (when enabled) |
Enabled |
— |
— |
Disabled |
Disabled |
Enabled |
|
Temperature |
Enabled for the primary temperature alarm (default values of 92°C and -40°C for the high and low thresholds respectively) Disabled for the secondary alarm. |
— |
— |
Enabled for primary temperature alarm |
Enabled for primary temperature alarm |
Enabled for primary temperature alarm |