Create a Twice NAT Rule

Before you begin

Create a network object or network group that defines the pool of IP addresses you are going to translate to itself. For the ASA, the range of addresses can be defined by a network object that uses an IP address range, a network object that defines a subnet, or a network group object that includes all the addresses in the range. For the FTD, the range of addresses can be defined by a network object that defines a subnet or a network group object that includes all the addresses in the range.

When creating the network objects or network groups, use Create or Edit ASA Network Objects and Network GroupsCreate or Edit a Firepower Network Object or Network Group for instructions.

For the sake of the following procedure, we are going call the network object or network group, Site-to-Site-PC-Pool.

Procedure

Step 1

In the CDO navigation bar, click Inventory.

Step 2

Click the Devices tab to locate the device or the Templates tab to locate the model device.

Step 3

Click the appropriate device type tab.

Step 4

Select the device you want to create the NAT rule for.

Step 5

Click NAT in the Management pane at the right.

Step 6

Click > Twice NAT..

Step 7

In section 1, Type, select Static. Click Continue.

Step 8

In section 2, Interfaces, choose inside for the source interface and outside for the destination interface. Click Continue.

Step 9

In section 3, Packets, make these changes:

  • Expand the Original Address menu, click Choose, and select the Site-to-Site-PC-Pool object you created in the prerequisites section.

  • Expand the Translated Address menu, click Choose, and select the Site-to-Site-PC-Pool object you created in the prerequisites section.

Step 10

Skip section 4, Advanced.

Step 11

For an FDM-managed device, in section 5, Name, give the NAT rule a name.

Step 12

Click Save.

Step 13

For an ASA, create a crypto map. See CLI Book 3: Cisco ASA Series VPN CLI Configuration Guide and review the chapter on LAN-to-LAN IPsec VPNs for more information on creating a crypto map.

Step 14

Review and deploy now the changes you made, or wait and deploy multiple changes at once.

Entries in the ASA's Saved Configuration File

These are the entries that would appear in an ASA's saved configuration file as a result of these procedures.

Note

This does not apply to FDM-managed devices.

Objects created by this procedure

object network Site-to-Site-PC-Pool
range 10.10.2.0 10.10.2.255

NAT rules created by this procedure

nat (inside,outside) source static Site-to-Site-PC-Pool Site-to-Site-PC-Pool